Graphite Carbon Bearing for Dishwashers pumps
➠ Graphite bushings sizes in (mm) 15 × 12.1 × 6; 14 × 8.6 × 5; 14 × 9.6 × 5.
➠ The dimensions are absolutely accurate in the original (mm), see the table above line one.
➠ Diameter d1 is the original diameter of the outer ring, its size in (mm) is 15 — the original size of the manufacturer without deviations, which is necessary.
➠ Diameter d2 is the original diameter of the external stand, its size in (mm) is 10.2 — the original size of the manufacturer without deviations, which is necessary for proper stable and rigid positioning in the socket and rigid sealing of the sealing ring.
➠ The diameter d3 is the original exact in fractions of microns hole size for the rotor axis of the heat pump circulation pump of the dishwasher.
➠ The total height of the graphite bushing h1 is 12.1 mm. This value is obtained by adding the two heights of its defining.
1. This is the height of h2 — the height of the rack is equal to 6.0 mm.
2. This is the height h3 — the height of the ring is 6.1 mm.
Exact original dimensions of the height of the ring are important for keeping the rotor from the bottom and from the top, thus ensuring the stability of the rotor and the absence of a vertical runout of the rotor.
Graphite sleeves are made of opt., density graphite and have exact dimensions, which contributes to high-quality operation of the heat circulating pump. Graphite bushings repair kit.
Graphite bushings work fine in the aquatic environment, they do not need lubrication (they themselves are). Graphite bushings withstand very high temperatures and aggressive environments. Graphite has found wide application in the food industry.