Код ошибки стиральной техники WHIRLPOOL

Код ошибки стиральной техники WHIRLPOOL

Код ошибки стиральной техники WHIRLPOOL

Код ошибки стиральной техники WHIRLPOOL

   КОДЫ ОШИБОК                          НЕИСПРАВНОСТЬ                                                       TROUBLESHOOTING
  FH Прессостат (датчик уровня ) нет сигнала To clear the error, press “PAUSE / CANCEL” two times.
• If there is no water in the washing machine:
1. Make sure the water tap is open.
2. Check the inlet hose for kink and foreign objects (blockages), and also check the intake valve mesh.
3. Check the inlet valve for proper operation.
• If water is in the machine:
1. Verify that the drain pump is working.
2. Check the condition of the water level sensor tube. Check its connection to the drum and pressure sensor.
3. Check and make sure that the problem does not occur in the siphon.
4. Verify that the wiring harness is fully connected to: inlet valve, water level sensor, drain pump, central control panel (CCU).
5. Check all hoses for leaks.
6. Check the functionality of the level sensor.
7. Verify that the central control panel (CCU) is working.
  F 02 Увеличено время слива
Первые 4 минуты на дисплее будет ошибка «Sud», а с пятой минуты появляется ошибка F02
To clear the error, press “PAUSE / CANCEL” two times.
1. Check the drain hose and make sure that there are no kinks or clogging with foreign objects.
2. Check the electrical contacts of the pump and make sure that the pump is working.
3. Check the drain pump filter for foreign objects.
4. If, after performing all the measures listed above, the error appears again — replace the drain pump.
  F 05 Ошибка датчика температуры 1. Check the health of the temperature sensor, heating element (heater) and the relay of the heating element.
2. Check that the connection of the sensor with the heating element and the relay is complete.
  F 06 Ошибка тахо мотора 1. Check the integrity of the connection between the motor and the motor control panel (MCU), as well as between the motor control panel and the central control panel (CCU).
2. Check motor operation.
3. Check motor control panel.
4. Check the wiring harness.Код ошибки стиральной техники WHIRLPOOL
  F 07 Ошибка панели управления двигателем 1. Verify that the wiring harness of the motor is connected to the engine control panel (MCU), and between the MCU and the central control panel (CCU).
2. Check motor control panel.
3. Check motor.
4. Check the wiring harness.
  F 09  Переполнение бака 1. Check the drain hose and make sure that it is not blocked or kinked.
2. Check the continuity of the wiring harness connection to the drain pump, pressure sensor / switch and central control panel (CCU).
3. Check / clean the drain pump filter in case of clogging.
4. Check and eliminate damage to the drain pump.
5. Check and verify that the inlet valve closes completely.
6. Check and verify that the pressure sensor is working properly.
  F 10  Сработало устройство теплопоглощения в блоке управления двигателя (MCU) 1. Check the installation of the unit and make sure that the washing machine is not standing next to the heat source and there is adequate ventilation.
2. Check the integrity of the connection between the harness and the motor control panel and central control panel (CCU).
3. Check moving parts for worn or inoperative components.
4. Check motor control panel.
5. Check motor.
  F 11 Ошибки коммуникации между компонентами Communication between the central control panel and the motor control panel is broken.
1. Check the integrity of the connection between the harness and the motor control panel, motor and central control panel (CCU).
2. Check moving parts for worn or inoperative components.
3. Check motor control panel.
4. Check the main unit control panel.
5. Check motor.
6. Check the wiring harness.
  F 13 Нарушение работы цепи дозатора (диспенсера) 1. Check the connection of the metering motor to the top of the metering unit for mechanical damage.
2. Check the integrity of the harness connection between the distributor (dispenser) motor and the central control panel (CCU).
3. Check the metering motor.
  F 14 Ошибка энергозависимой памяти EEPROM 1. A voltage surge can lead to such an error. Try turning the unit off for two minutes and the error may disappear.
2. Check the central control panel.
  F 15 Ошибка панели управления мотором (MCU) 1. Check the integrity of the harness connection between the motor control panel, the motor itself and the central control panel (CPU).
2. Check the belt on the motor.
3. Check motor control panel.
4. Check motor.
5. Check the wiring harness.
  Sud(пена или пениспая вода) Сработал «SUDS LOCK»(механизм блокировки машинки при появлении избыточной пены) If the machine is filled with excess detergent, run “Rinse / Spin” (rinse and spin cycle), and then a normal wash cycle without adding detergent. This should clean the machine of excess detergent.
1. Check the drain hose and make sure it is completely passable and there are no kinks.
2. Check wiring harness contacts at the drain pump, switch (level sensor), and central control panel (CCU).
3. Check the drain pump filter for foreign objects. To clear.
4. Check the drain pump.
5. Check the water level switch (sensor).
6. Check the central control panel.
 FdL Дверца люка не блокируется 1. The door lock mechanism is broken or removed from the door.
2. Check the door lock switch-sensor block.
3. Check wiring harness contacts at the drain pump, switch (pressure sensor), and central control panel (CCU).
4. The lock-switch-door sensor unit does not work.
 FdU Дверца люка не открывается 1. The door lock mechanism is damaged.
2. Check the door switch-lock assembly for foreign objects.
3. Check the harness connection to the door switch-lock assembly and the central control panel (CCU).
4. The door closing-opening block does not work.

Ремонт стиральных машин WHIRLPOOL и другой стиральной техники в Днепре на высоком профессиональном уровне..

Предыдущая запись Repair kit with spherical copper graphite bushings
Следующая запись Коды ошибок варочных AEG BOSCH ARISTON ZANUSSI

Ваш комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

Этот сайт использует Akismet для борьбы со спамом. Узнайте как обрабатываются ваши данные комментариев.